Shaved ice machine
Qingdao cold machine wholesale Small make up to tell you Shaved ice machine
1, in order to ensure safety, dont allow direct pressure block ice material cutting by hand.
2, after each use, must be clean, clean and should be shut down when the main power switch, remove the plug, and then wipe dry with a clean towel on the water. After the cleaning, remember to put the pressure is expected to cover the handle.
3, clean and not allowed to use cleaner, in order to prevent the residual detergent pollution caused by the on board. Cant wash with water directly, in order to avoid electrical components be affected with damp be affected with damp, affect the safe use and damage the unit.
4, this machine motor design temporarily cut at a rate of 80%, avoid long time continuous work. In continuous work an hour later, should suspend twenty minutes, start work again. This will greatly prolong the service life of the motor.
5, both cleaning, maintenance, replacement blades or clear ice slag and so on related work, should turn off the power and unplug the power plug. Dont allow the captain no-load running time.
